View 19-223-Y2G6C-A01-2T_8065588.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

everlight electronics co., ltd. http://www.everlight.com rev 2 page: 1 of 11 device no: dse - 000 prepared date: 07 - sep - 200 9 prepare d by: xu juan technical data sheet chip led with bi - color(multi - color) 19 - 223/y2 g6 c - a01/2t features ? package in 8mm tape on 7 diameter reel. ? compatible with automatic place ment equipment. ? compatible with infrared and vapor phase reflow solder process. ? mulit - color type. ? pb free . ? the product itself will remain within rohs compliant version. descriptions ? the 19 - 22 3 smd led is much smaller than lead frame type component s, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ? besides, lightweight makes them ideal for miniature applications. etc. applications ? b acklighting in dashboard and switch. ? te lecommunication: indicator and backlighting in telephone and fax. ? flat backlight for lcd, switch and symbol. ? general use. device selection guide chip emitted color resin color type material y2 algainp brilliant yellow water c lear g6 algainp brilliant yellow green
19 - 223/y 2g6 c - a01/2t everlight electronics co., ltd. http://www.everlight.com rev 2 page: 2 of 11 device no: dse - 000 prepared date: 07 - sep - 200 9 prepare d by: xu juan package outline dimensions note: the tolerances unless mentioned is 0.1mm ,unit = mm
19 - 223/y 2g6 c - a01/2t everlight electronics co., ltd. http://www.everlight.com rev 2 page: 3 of 11 device no: dse - 000 prepared date: 07 - sep - 200 9 prepare d by: xu juan absolute maximum ratings (ta=25 parameter symbol rating unit reverse voltage v r 5 v forward current i f 25 ma peak forward current (duty 1/10 @1khz) i fp y2:60 g6 : 60 ma power dissipation p d y2:60 g6: 60 mw electrostatic discharge (hbm) esd 2000 v operating temperature topr - 40 ~ +8 5 storage temperature tstg - 40 ~ +90 soldering temperature tsol reflow soldering : 260 for 10 sec. hand soldering : 350 for 3 sec . electro - optical characteristics (ta=25 parameter symbol min. typ. max. unit condition luminous intensity iv y2 g6 36 .0 28.5 ----- ----- 72 .0 57.0 mcd i f =20ma viewing angle 2 1/2 ----- 1 3 0 ----- deg peak wavelength p y2 g6 ----- 591 575 ----- nm dominant wavelength d y2 g6 ----- 589 573 ----- nm spectrum radiation bandwidth y2 g6 ----- 15 20 ----- nm forward voltage v f y2 g6 1.7 1.7 2.0 2.0 2.4 2.4 v reverse current i r y2 g6 ----- ----- 10 10 a v r = 5v note: 1.tolerance of luminous intensity
19 - 223/y 2g6 c - a01/2t everlight electronics co., ltd. http://www.everlight.com rev 2 page: 4 of 11 device no: dse - 000 prepared date: 07 - sep - 200 9 prepare d by: xu juan y2 bin range of luminous intensity bin min ma x unit condition n2 36.0 45.0 mcd i f = 20 ma p1 45.0 57.0 p2 57.0 72.0 g6 bin range of luminous intensity bin min max unit condition n1 28.5 36.0 mcd i f = 20 ma n 2 36.0 45.0 p1 45.0 57.0 note: 1.tolerance of luminous intensity
19 - 223/y 2g6 c - a01/2t everlight electronics co., ltd. http://www.everlight.com rev 2 page: 5 of 11 device no: dse - 000 prepared date: 07 - sep - 200 9 prepare d by: xu juan typical electro - optical characteristics curves y2 ta=25c relative luminous intensity ambient temperature t (c ) a % ) ( relative luminous intensity ( ) % wavelength (nm) ta=25c forward voltage v (v) f forward current i (ma) relative luminous intensity ( ) % forward current i (ma) ta=25c ambient temperature t (c a ) forward current i (ma) ta=25c
19 - 223/y 2g6 c - a01/2t everlight electronics co., ltd. http://www.everlight.com rev 2 page: 6 of 11 device no: dse - 000 prepared date: 07 - sep - 200 9 prepare d by: xu juan typical electro - optical characteristics curves g6 ta=25c relative luminous intensity ambient temperature t (c ) a % ) ( relative luminous intensity ( ) % wavelength (nm) forward voltage v (v) f forward current i (ma) relative luminous intensity ( ) % forward current i (ma) ta=25c ambient temperature t (c a ) forward current i (ma) ta=25c ta=25c
19 - 223/y 2g6 c - a01/2t everlight electronics co., ltd. http://www.everlight.com rev 2 page: 7 of 11 device no: dse - 000 prepared date: 07 - sep - 200 9 prepare d by: xu juan label explanation cat: luminous intensity rank hue: dom. wavelength rank ref: forward voltage rank reel dimensions note: the tolerances unless mentioned is 0.1mm ,unit = mm rohs pb cpn : p n : xxxxxxxxxxxxx xxxxxxxxxxxxx qty : xxx lot no : xxxxxxxxxx reference : xxxxxxxx cat : xxx hue : xxx ref : xxx everlight made in taiwan
19 - 223/y 2g6 c - a01/2t everlight electronics co., ltd. http://www.everlight.com rev 2 page: 8 of 11 device no: dse - 000 prepared date: 07 - sep - 200 9 prepare d by: xu juan carrier tape dimensions: loaded quantity 2000 pcs per reel no te: the tolerances unless mentioned is 0.1mm ,unit = mm moisture resistant packaging label desiccant label aluminum moisture-proof bag
19 - 223/y 2g6 c - a01/2t everlight electronics co., ltd. http://www.everlight.com rev 2 page: 9 of 11 device no: dse - 000 prepared date: 07 - sep - 200 9 prepare d by: xu juan reliability test items and conditions the reliability of products shall be satisfied with items listed below. confidenc e level 90% ltpd 1 0% no. items test condition test hours/cycles sample size ac/re 1 reflow soldering temp. : 2 6 0 5 min. 5 sec. 6 min. 22 p cs. 0/1 2 temperature cycle h : + 100 15min 5 min l : - 40 15min 30 0 cycles 22 pcs. 0/1 3 thermal shock h : +100 5min 10 sec l : - 10 5min 30 0 cycles 22 p cs. 0/1 4 high temperature storage temp. : 100 1000 hrs. 22 p cs. 0/1 5 low temperature storage temp. : - 40 1000 hrs. 22 p cs. 0/1 6 dc operating life i f = 20 ma 1000 hrs. 22 p cs. 0/1 7 high temperature / hi gh humidity 85 / 85% rh 1000 hrs. 22 p cs. 0/1
19 - 223/y 2g6 c - a01/2t everlight electronics co., ltd. http://www.everlight.com rev 2 page: 10 of 11 device no: dse - 000 prepared date: 07 - sep - 200 9 prepare d by: xu juan precautions for use 1. over - current - proof customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( burn out will happen ). 2. storage 2.1 do not open moisture proof bag before the products are ready to use. 2.2 before opening the package : t he leds should be kept at 30 or l ess and 90%rh or less. 2.3 after opening the package : t he led's floor life is 1 year un der 30 or less and 6 0% rh or less. if unused leds remain, it should be stored in moisture proof packages. 2. 4 if the moisture absorbent material (silica gel) has faded away or the leds have exceeded the storage time, baking treatment should be performed using the following conditions. baking treatment : 60 5 for 24 hours. 3. soldering condition 3.1 pb - free solder temperature profile 3.2 reflow soldering should not be done more than two times. 3.3 when soldering, do not put stress on the leds during heating. 3.4 after soldering, do not warp the circuit board.
19 - 223/y 2g6 c - a01/2t everlight electronics co., ltd. http://www.everlight.com rev 2 page: 11 of 11 device no: dse - 000 prepared date: 07 - sep - 200 9 prepare d by: xu juan 4.soldering iron each terminal is to go to the tip of soldering iron temperature less than 35 0 for 3 seconds within once in less than the solderi ng iron capacity 25w. leave two seconds and more intervals, and do soldering of each terminal. be careful because the damage of the product is often started at the time of the hand solder. 5.repairing repair should not be done after the leds have been soldered. when repairing is unavoidable, a double - head soldering iron should be used (as below figure). it should be confirmed beforehand whether the characteristics of the leds will or will not be damaged by repairing. everlight electronics co., ltd. tel: 886 - 2 - 2267 - 2000, 2267 - 9936 office: no 25, lane 76, sec 3, chung yang rd, fax: 886 - 2267 - 6244, 2267 - 6189, 2267 - 6306 tucheng, taipei 236, taiwan, r .o.c http://www.everlight.com

▲Up To Search▲

Price & Availability of 19-223-Y2G6C-A01-2T

	To Download 19-223-Y2G6C-A01-2T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .